-
各位老师
布鲁克D8出现Safety Circuit 1# Open ,该这么处理啊?,安全回路出问题了,找工程师检查下,是不是拉门了啊?,可以做一下软件和硬件的重置试试。
2010年10月20日发布人:Andrew
-
are not required in the near microbe-free environment of a biological safety cabinet. On an open bench, flaming the neck
2012年03月23日发布人:fox_79
-
],[size=2][color=Black]
这个有很多原因哈!
1、确定表达是你的蛋白
2、破碎情况
3、buffer 的PH值 这个很重要
4、binding buffer、Washing buffer、 Elution buffer
2013年12月28日发布人:langlang
-
结果做单抗恐怕不行。
增加washing buffer 的量,延长洗涤时间或增加咪唑浓度。[/color][/size],[size=2][color=Black]
我给你发了份相关的材料,包括不同金属粒子的选择性和分离效果,只在做试验的
2013年05月13日发布人:如影随形
-
, Washing buffer 是相同条件的binding buffer 加 20 mM imidazole. Elouting buffer 是相同条件的binding buffer加上250 mM imidazole. pH 值都是 8.0
2013年09月02日发布人:911
-
, Washing buffer 是相同条件的binding buffer 加 20 mM imidazole. Elouting buffer 是相同条件的binding buffer加上250 mM imidazole. pH 值都是
2013年12月13日发布人:fsdd817
-
volume, at 4°C for 15 minutes.
8. Without washing after blocking step, add 20 µl fluorochrome conjugated anti
2012年05月21日发布人:leifengta
-
previously (Park and Noguera 2004). Briefly, this method used a set of eight serum bottles containing different oxygen levels
2013年04月20日发布人:舞疯
-
incubation 1h, wash with lysis buffer then move to three times washing by PBS.
Run gel-----> Good result!
Good luck[/font
2013年08月10日发布人:woshiduiyan
-
][color=Black][font=Verdana]
我一直用2%的BSA(用washing buffer溶解,同时添加0.09%的叠氮钠,保存在4度),常温封闭一个小时,从未出现过lz所说问题,建议lz尝试。
附几点说明,首先,很多人为了省钱,喜欢用奶粉代替bsa,其实如果做成杂交袋,bsa花不了
2014年03月10日发布人:rxcc33