-
这个故障出现后,为何光管会自动关闭?,这应该是关盖子超时了。,为何会超时?,两种可能会导致超时
1、Cap机械部分动作不畅;仔细观察将可以发现在关闭过程中有停顿等表现
2、定位传感;Cap虽然关闭完全了,但传感装置可能未完全耦合其动作
2015年11月25日发布人:jkh123
-
[size=2]这是气相色谱做裂解气的阀图的一部分,请问有没有高手见过这两个东东??
1,这是Agilent的阀图,请问front CAP是什么部件呢?
2,右边这个六通阀中五个圆圈是什么意思呀?为什么要画这五个圈圈呢
2014年08月25日发布人:sunshine039
-
, of methylenechlorideR.
Evaporate the combined methylene chloride extracts to dryness
in a vial with a screw cap
2012年02月25日发布人:gdcz1984
-
, of methylenechlorideR.
Evaporate the combined methylene chloride extracts to dryness
in a vial with a screw cap
2012年02月06日发布人:gdcz1984
-
Corp.; 1.5 L pan, Schlick 970/Vector hybrid nozzle, Liquid Tip 10W44019 with a 1.0 mmorifice, Air cap 27w44183 anti-bearding
2014年05月06日发布人:tomm
-
Corp.; 1.5 L pan, Schlick 970/Vector hybrid nozzle, Liquid Tip 10W44019 with a 1.0 mmorifice, Air cap 27w44183 anti-bearding
2014年05月05日发布人:红旗渠
-
superq软件里面的“close cap”盖上仪器盖子后,真空度能够下降到8pa左右。,之前一直认为是进样口附近的几个o型圈老化造成,但是取出,擦拭,效果改善不明显,后来有怀疑是顶杆pluger运动不到位,力度不够,造成密封不严。没去尝试
2015年12月06日发布人:艰苦奋斗
-
真空,打开cap盖看看试样在什么位置,有没有明显机械错位,打开光谱室取出试样,有两种故障可能:
1、plunger轴封脏了,需更换相应密封圈、垫圈和清洗灰尘;2、plunger下面的arm裂了。,谢谢!这得需要专业维修人员处理啊!刚使用了2个月!郁闷!!,理解错误代码的物理地址“3,0,2,0,0,你帮忙解释一下吧。,每个错误代码都会对应一个具体的逻辑
2015年11月27日发布人:jom
-
为了做一个与肺癌和肝癌的相关的细胞学实验,急需一些细胞株,在这里想跟大家做交换,请帮忙!
我手中有,mcf-7,786-0,in-cap,raji,du-145,HepG2的几种细胞株
我需要的细胞株有A549,H1299,H446
2016年03月11日发布人:33号
-
with the screw cap. The tube was then heated in a boiling water bath for the requisite time, cooled, and opened.
2015年03月19日发布人:翔少爷